Dell Brocade 6520 MIB Reference Supporting Fabric OS v7.1.0 - Page 351

18 Q-Bridge MIB TABLE 128 Object and OID Access Description dot1qStaticMulticastForbid denEgressPorts 1.3.6.1.2.1.17.7.1.3.2.1.4 Read-write The set of ports to which frames received from a specific port and destined for a specific multicast or broadcast MAC address must not be forwarded, regardless of any dynamic information, for example, from GMRP. dot1qStaticMulticastStatus 1.3.6.1.2.1.17.7.1.3.2.1.5 Read-write This object indicates the status of this entry. Values: • other (1) - This entry is currently in use, but the conditions under which it will remain so differ from the following values. • invalid (2) - Writing this value to the object removes the corresponding entry. • permanent (3) - This entry is currently in use and will remain so after the next reset of the bridge. • deleteOnReset (4) - This entry is currently in use and will remain so until the next reset of the bridge. • deleteOnTimeout (5) - This entry is currently in use and will remain so until it is aged out. dot1qVlan group TABLE 129 Object and OID Access Description dot1qVlanCurrentTable 1.3.6.1.2.1.17.7.1.4.2 Not A table containing current configuration information for each VLAN accessible currently configured into the device by (local or network) management, or dynamically created as a result of GVRP requests received. dot1qVlanCurrentEntry 1.3.6.1.2.1.17.7.1.4.2.1 Not Information for a VLAN configured into the device by (local or network) accessible management, or dynamically created as a result of GVRP requests received. dot1qVlanTimeMark Not A time filter for this entry. 1.3.6.1.2.1.17.7.1.4.2.1.1 accessible dot1qVlanIndex Not The VLAN ID or other identifier referring to this VLAN. 1.3.6.1.2.1.17.7.1.4.2.1.2 accessible dot1qVlanFdbId 1.3.6.1.2.1.17.7.1.4.2.1.3 Read only The filtering database used by this VLAN.This is one of the dot1qFdbId values in the dot1qFdbTable. This value is allocated automatically by the device whenever the VLAN is created: either dynamically by GVRP, or by management, in dot1qVlanStaticTable. dot1qVlanCurrentEgressPo rts 1.3.6.1.2.1.17.7.1.4.2.1.4 Read only The set of ports that are transmitting traffic for this VLAN as either tagged or untagged frames. dot1qVlanCurrentUntagged Read only Ports 1.3.6.1.2.1.17.7.1.4.2.1.5 The set of ports that are transmitting traffic for this VLAN as untagged frames. Fabric OS MIB Reference 331 53-1002750-01