Dell Brocade 6520 MIB Reference Supporting Fabric OS v7.1.0 - Page 115

fcFeConfig group 4 TABLE 33 Object and OID fcFxConfTable 1.3.6.1.3.42.2.1.1.5 fcFxConfEntry 1.3.6.1.3.42.2.1.1.5.1 fcFxConfModuleIndex 1.3.6.1.3.42.2.1.1.5.1.1 fcFxConfFxPortIndex 1.3.6.1.3.42.2.1.1.5.1.2 Access Not accessible Not accessible Read only Read only fcFxPortName 1.3.6.1.3.42.2.1.1.5.1.3 Read only fcFxPortFcphVersionHigh 1.3.6.1.3.42.2.1.1.5.1.4 fcFxPortFcphVersionLow 1.3.6.1.3.42.2.1.1.5.1.5 fcFxPortBbCredit 1.3.6.1.3.42.2.1.1.5.1.6 Read only Read only Read only fcFxPortRxBufSize 1.3.6.1.3.42.2.1.1.5.1.7 fcFxPortRatov 1.3.6.1.3.42.2.1.1.5.1.8 Read only Read only fcFxPortEdtov 1.3.6.1.3.42.2.1.1.5.1.9 Read only fcFxPortCosSupported Read only 1.3.6.1.3.42.2.1.1.5.1.10 fcFxPortIntermixSupported Read only 1.3.6.1.3.42.2.1.1.5.1.11 Description A table that contains, one entry for each Fx_Port in the fabric element, configuration and service parameters of the Fx_Ports. An entry containing the configuration and service parameters of an Fx_Port. Identifies the module containing the Fx_Port for which this entry contains information. Identifies the Fx_Port within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value remains constant for the identified Fx_Port until the module is re-initialized. The name identifier of this Fx_Port. Each Fx_Port has a unique port name within the address space of the fabric. The return value is the WWN of the port. The highest or most recent version of FC-PH that the Fx_Port is configured to support. The lowest or earliest version of FC-PH that the Fx_Port is configured to support. The total number of receive buffers available for holding Class 1 connect-request Class 2 or 3 frames from the attached Nx_Port. It is for buffer-to-buffer flow control in the direction from the attached Nx_Port (if applicable) to Fx_Port. The largest Data_Field Size (in octets) for an FT_1 frame that can be received by the Fx_Port. The Resource_Allocation_Timeout Value configured for the Fx_Port. This is used as the time-out value for determining when to reuse an Nx_Port resource such as a Recovery_Qualifier. It represents E_D_TOV (Refer to "fcFxPortEdtov" on page 80) plus twice the maximum time that a frame might be delayed within the fabric and still be delivered. The E_D_TOV value configured for the Fx_Port. The Error_Detect_Timeout Value is used as the time-out value for detecting an error condition. A value indicating the set of Classes of Service supported by the Fx_Port. Valid values: • Class F (0) • Class 1 (1) • Class 2 (2) • Class 3 (3) • Class 4 (4) • Class 5 (5) • Class 6 (6) A flag indicating whether the Fx_Port supports an Intermixed Dedicated Connection. Valid values: • yes (1) • no (2) Fabric OS MIB Reference 95 53-1002750-01