Dell Brocade 6520 MIB Reference Supporting Fabric OS v7.1.0 - Page 118

4 fcFeOp group TABLE 34 Object and OID Access Description fcFxPortPhysOperStatus 1.3.6.1.3.42.2.1.2.3.1.4 Read only The current operational status of the Fx_Port: • online (1) Log in might proceed. • offline (2) Log in cannot proceed. • testing (3) Port is under test. link-failure (4) Failure after online/testing. The testing state (3) indicates that no operational frames can be passed. If fcFxPortPhysAdminStatus is offline (2), then fcFxPortPhysOperStatus should be offline (2). If fcFxPortPhysAdminStatus is changed to online (1), then fcFxPortPhysOperStatus should change to 1 (online) if the Fx_Port is ready to accept fabric login request from the attached Nx_Port; it should proceed and remain in the link-failure state (4) if and only if there is a fault that prevents it from going to the online state (1). fcFxPortPhysLastChange 1.3.6.1.3.42.2.1.2.3.1.5 Read only The value of sysUpTime at the time the Fx_Port entered its current operational status. A value of 0 indicates that the Fx_Port's operational status has not changed since the agent last restarted. fcFxPortPhysRttov Read only The Receiver_Transmitter_Timeout value of the Fx_Port. This is used by 1.3.6.1.3.42.2.1.2.3.1.6 the receiver logic to detect Loss of Synchronization. fcFxlogiTable 1.3.6.1.3.42.2.1.2.4 Not This table contains one entry for each Fx_Port in the fabric element, and accessible the Service Parameters that have been established from the most recent fabric login, whether implicit or explicit. fcFxlogiEntry 1.3.6.1.3.42.2.1.2.4.1 Not An entry containing service parameters established from a successful accessible fabric login. fcFxlogiModuleIndex Read only Identifies the module containing the Fx_Port for which this entry 1.3.6.1.3.42.2.1.2.4.1.1 contains information. fcFxlogiFxPortIndex 1.3.6.1.3.42.2.1.2.4.1.2 Read only Identifies the Fx_Port within the module. This number ranges from 1 to the value of fcFeModulePortCapacity for the associated module. The value remains constant for the identified Fx_Port until the module is re-initialized. fcFxlogiNxPortIndex Read only The object identifies the associated Nx_Port in the attachment for which 1.3.6.1.3.42.2.1.2.4.1.3 the entry contains information. fcFxPortFcphVersionAgree Read only d 1.3.6.1.3.42.2.1.2.4.1.4 The version of FC-PH that the Fx_Port has agreed to support from the fabric login. fcFxPortNxPortBbCredit 1.3.6.1.3.42.2.1.2.4.1.5 Read only The total number of buffers available for holding Class 1 connect-request Class 2 or Class 3 frames to be transmitted to the attached Nx_Port. It is for buffer-to-buffer flow control in the direction from Fx_Port to Nx_Port. The buffer-to-buffer flow control mechanism is indicated in the respective fcFxPortBbCreditModel. fcFxPortNxPortRxDataFiel Read only dSize 1.3.6.1.3.42.2.1.2.4.1.6 The Receive Data Field Size of the attached Nx_Port. This is a binary value that specifies the largest Data Field Size for an FT_1 frame that can be received by the Nx_Port. The value is a number of bytes in the range 128 to 2112, inclusive. fcFxPortCosSuppAgreed Read only Indicates that the attached Nx_Port has requested the Fx_Port for the 1.3.6.1.3.42.2.1.2.4.1.7 support of classes of services and the Fx_Port has granted the request. 98 Fabric OS MIB Reference 53-1002750-01