Dell Brocade 6520 MIB Reference Supporting Fabric OS v7.1.0 - Page 232

9 Connectivity unit group TABLE 75 Object and OID Access Description connUnitSensorInfo 1.3.6.1.3.94.1.8.1.5 Read only connUnitSensorMessage Read only 1.3.6.1.3.94.1.8.1.6 Miscellaneous static information about the sensor, such as its serial number. Each contains textual information about the sensor. Returns the serial ID if this is for the power supply; otherwise, returns Null. This describes the status of the sensor as a message. It may also provide some information about the sensor, for example: sensor 1: type 3 is OK, value is 33 connUnitSensorType 1.3.6.1.3.94.1.8.1.7 Read only Each contains the sensor status (and reading if applicable) in textual format. The type of component being monitored by this sensor. Possible values are: • unknown (1) • other (2) • battery (3) • fan (4) • power-supply (5) • transmitter (6) • enclosure (7) • board (8) • receiver (9) The following mapping is for each individual sensor, where applicable: connUnitSensorCharacte Read only ristic 1.3.6.1.3.94.1.8.1.8 connUnitPortTable 1.3.6.1.3.94.1.10 Not accessible swSensorType 1 (temperature) 2 (fan) 3 (power supply) connUnitSensorType 8 (board) 4 (fan) 5 (power supply) The characteristics being monitored by this sensor. The following mapping is for each individual sensor, where applicable: swSensorType connUnitSensorCharacteristic 1 (temperature) 3 (temperature) 2 (fan) 7 (airflow) 3 (power supply) 9 (power) Possible values are: • unknown (1) • other (2) • temperature (3) • pressure (4) • emf (5) • currentValue (6) Current is a keyword. • airflow (7) • frequency (8) • power (9) • door (10) - Not supported in Fabric OS v2.6.1. Generic information on ports for a specific connUnit NOTE: Information about the GbE ports on a Brocade 7500 or FR4-18i blade is not supported. 212 Fabric OS MIB Reference 53-1002750-01