Dell Brocade G620 Hardware Installation Guide - Page 31

Attaching the extension brackets to the device

Get Dell Brocade G620 PDF manuals and user guides View all Dell Brocade G620 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

Attaching the extension brackets to the device 1 The Brocade device 2 Front brackets 3 Screws, 8-32 x 5/16-in., flathead Phillips FIGURE 4 Attaching the front brackets Attaching the extension brackets to the device Complete the following steps to attach the extension brackets to the device. There are medium and long extension brackets that you can use for this step. Choose the correct extension bracket for the depth of your rack. 1. Select the proper length extension bracket for your rack depth. 2. Position the right extension bracket along the side of the device as shown in Figure 5 . 3. Insert four 8-32 x 5/16-in. flathead screws through the vertically aligned holes in the extension bracket and then into the holes on the side of the device. Use the upper and lower screw holes, leaving the center holes empty. 4. Repeat step 1 and step 2 to attach the left extension bracket to the left side of the device. 5. Tighten all the 8-32 x 5/16-in. screws to a torque of 15 in-lb (17 cm-kg). Brocade G620 Hardware Installation Guide 31 53-1003990-01

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
1
The Brocade device
2
Front brackets
3
Screws, 8-32 x 5/16-in., flathead
Phillips
FIGURE 4
Attaching the front brackets
Attaching the extension brackets to the device
Complete the following steps to attach the extension brackets to the device. There are medium and long
extension brackets that you can use for this step. Choose the correct extension bracket for the depth of
your rack.
1.
Select the proper length extension bracket for your rack depth.
2.
Position the right extension bracket along the side of the device as shown in
Figure 5
.
3.
Insert four 8-32 x 5/16-in. flathead screws through the vertically aligned holes in the extension
bracket and then into the holes on the side of the device. Use the upper and lower screw holes,
leaving the center holes empty.
4.
Repeat step 1 and step 2 to attach the left extension bracket to the left side of the device.
5.
Tighten all the 8-32 x 5/16-in. screws to a torque of 15 in-lb (17 cm-kg).
Attaching the extension brackets to the device
Brocade G620 Hardware Installation Guide
31
53-1003990-01