Dell Brocade G620 Hardware Installation Guide - Page 33
Attaching the rear brackets to the extensions
![]() |
View all Dell Brocade G620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Attaching the rear brackets to the extensions 1 Screws, 10-32 x 5/8-in., panhead Phillips 2 Retainer nuts, 10-32 FIGURE 6 Positioning the device in the rack Attaching the rear brackets to the extensions Complete the following steps to attach the rear brackets to the extensions. There are short and long rear brackets that you can use for this step. Choose the correct bracket for the depth of your rack. 1. Select the proper length rear bracket for your rack depth. 2. Slide the right rear bracket onto the right extension and attach to the extension by inserting four 6-32 x 1/4-in. panhead screws through the bracket holes. If possible, leave at least one empty vertical pair of holes between the screws for better support. 3. Repeat step 2 to attach the left rear bracket to the left extension. 4. Adjust the brackets to the rack depth and tighten all the 6-32 x 1/4-in. screws to a torque of 9 in-lb (10 cm-kg). Brocade G620 Hardware Installation Guide 33 53-1003990-01
![](/manual_guide/products/dell-brocade-g620-hardware-installation-guide-12e7feb/33.png)