Dell Brocade G620 Hardware Installation Guide - Page 45
Attaching the rear brackets to the device,
View all Dell Brocade G620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Attaching the rear brackets to the device 1 Retainer nuts, 10-32 2 Rear brackets 3 Screws, 10-32 x 5/8-in., panhead Phillips FIGURE 18 Attaching the rear brackets to a rack Attaching the rear brackets to the device Complete the following steps to attach the rear brackets to the device. 1. Align the right rear bracket to the right rear of the device and use four 8-32 x 5/16-in. panhead screws to attach the bracket to the device, as shown in Figure 19 . Be sure to insert the screws through the upper and lower slots in the bracket. 2. Align the left rear bracket to the left rear of the device and use four 8-32 x 5/16-in. panhead screws to attach the bracket to the device. Again, use the upper and lower slots in the bracket. 3. Tighten all the 8-32 x 5/16-in. screws to a torque of 15 in-lb (17 cm-kg). Brocade G620 Hardware Installation Guide 45 53-1003990-01