Dell Brocade G620 Hardware Installation Guide - Page 47
Attaching the front brackets to the rack,
![]() |
View all Dell Brocade G620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Attaching the front brackets to the rack 3. Repeat step 1 and step 2 to attach the left front bracket to the left side of the device. 4. Tighten all the 8-32 x 5/16-in. screws to a torque of 15 in-lb (17 cm-kg). 1 The Brocade device 2 Front brackets, right and left 3 Screws, 8-32 x 5/16-in., flathead Phillips FIGURE 20 Attaching the front brackets Attaching the front brackets to the rack Complete the following steps to install the device in the rack. 1. Position the device in the rack, as shown in Figure 21 , providing temporary support under the device until the rack kit is fully secured to the rack. 2. Attach the right front bracket to the right rack upright using two 10-32 x 5/8-in. screws and two retainer nuts. Use the upper and lower holes in the bracket. 3. Attach the left front bracket to the left rack upright using two 10-32 x 5/8-in. screws and two retainer nuts. Use the upper and lower holes in the bracket. 4. Tighten all the 10-32 x 5/8-in. screws to a torque of 25 in-lb (29 cm-kg). Brocade G620 Hardware Installation Guide 47 53-1003990-01
![](/manual_guide/products/dell-brocade-g620-hardware-installation-guide-12e7feb/47.png)