Dell Brocade G620 Hardware Installation Guide - Page 84
Other, LEDs
View all Dell Brocade G620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Brocade G620 Technical Specifications Other LEDs System component ANSI Fibre Channel protocol Modes of operation Fabric initialization FCIP (IP over Fibre Channel) Port Status Description FC-PH (Fibre Channel Physical and Signaling Interface standard) Fibre Channel Class 2 and Class 3 Complies with FC-SW-3 Rev. 6.6 Complies with FC-IP 2.3 of FCA profile Bicolor LED (amber/green) System component Serial console port Description One three-wire (Tx, Rx, Gnd) UART serial port Ethernet management port One 1000Base-X / 100Base-TX port / 10Base-T USB port One external USB port System component System power LED Description One green system power status LED (upper) on the port side. System status LED One bicolor (green/amber) system status LED (lower) on the port side. Ethernet port link LED One link LED on the left of the RJ45 connector. Glows green for 1000 Mbps and amber for 100/10 Mbps. Ethernet port activity LED One activity LED on the right of the RJ45 connector. Serial console port LED The serial console port LEDs remain off at all times, even when a cable is inserted and the link is active. FC port status LED 64 bicolor (green/amber) port status LEDs. One for each SFP+ port and four for each QSFP port on the switch. Power supply and fan assembly status LED One green power supply and fan assembly status LED on each power supply and fan assembly on the nonport-side of the switch. 84 Brocade G620 Hardware Installation Guide 53-1003990-01