Dell Brocade G620 Hardware Installation Guide - Page 34
Attaching the rear brackets to the rack posts
![]() |
View all Dell Brocade G620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Attaching the rear brackets to the rack posts 1 Rear brackets 2 Screws, 6-32 x 1/4-in., panhead Phillips FIGURE 7 Attaching the rear brackets to the extensions Attaching the rear brackets to the rack posts Complete the following steps to attach the rear brackets to the rack posts. 1. Attach the right rear bracket to the right rear rack post using two 10-32 x 5/8-in. panhead screws and two retainer nuts, as shown in Figure 8 . Use the upper and lower holes in the bracket. 2. Attach the left rear bracket to the left rear rack post using two 10-32 x 5/8-in. panhead screws and two retainer nuts. Use the upper and lower holes in the bracket. 3. Tighten all the 10-32 x 5/8-in. screws to a torque of 25 in-lb (29 cm-kg). 34 Brocade G620 Hardware Installation Guide 53-1003990-01
![](/manual_guide/products/dell-brocade-g620-hardware-installation-guide-12e7feb/34.png)