Dell Brocade G620 Hardware Installation Guide - Page 49

Attaching the rear brackets to the device

Get Dell Brocade G620 PDF manuals and user guides View all Dell Brocade G620 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 49 highlights

Attaching the rear brackets to the device 1 Retainer nuts, 10-32 2 Retainer nuts, 10-32 3 Rear brackets (right and left) 4 Screws, 10-32 x 5/8-in., panhead Phillips FIGURE 22 Attaching the rear brackets to a rack Attaching the rear brackets to the device Complete the following steps to attach the rear brackets to the device. 1. Align the right rear bracket to the right rear of the device and use four 8-32 x 5/16-in. panhead screws to attach the bracket to the device, as shown in Figure 23 . Be sure to insert the screws through the upper and lower slots in the bracket. 2. Align the left rear bracket to the left rear of the device and use four 8-32 x 5/16-in. panhead screws to attach the bracket to the device. Again, use the upper and lower slots in the bracket. 3. Tighten all the 8-32 x 5/16-in. screws to a torque of 15 in-lb (17 cm-kg). Brocade G620 Hardware Installation Guide 49 53-1003990-01

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
1
Retainer nuts, 10-32
2
Retainer nuts, 10-32
3
Rear brackets (right and left)
4
Screws, 10-32 x 5/8-in., panhead
Phillips
FIGURE 22
Attaching the rear brackets to a rack
Attaching the rear brackets to the device
Complete the following steps to attach the rear brackets to the device.
1.
Align the right rear bracket to the right rear of the device and use four 8-32 x 5/16-in. panhead
screws to attach the bracket to the device, as shown in
Figure 23
. Be sure to insert the screws
through the upper and lower slots in the bracket.
2.
Align the left rear bracket to the left rear of the device and use four 8-32 x 5/16-in. panhead screws to
attach the bracket to the device. Again, use the upper and lower slots in the bracket.
3.
Tighten all the 8-32 x 5/16-in. screws to a torque of 15 in-lb (17 cm-kg).
Attaching the rear brackets to the device
Brocade G620 Hardware Installation Guide
49
53-1003990-01