Dell Brocade G620 Hardware Installation Guide - Page 42

Flush-front mounting

Get Dell Brocade G620 PDF manuals and user guides View all Dell Brocade G620 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 42 highlights

Flush-front mounting 1 Front brackets (2) 6 Screw, 6-32 x 1/4-in., panhead Phillips 2 Rear brackets, 3-5 inch post (2) (8) 3 Rear brackets, 5-6 inch post (2) 7 Screw, 10-32 x 5/8-in., panhead Phillips 4 Screw, 8-32 x 5/16-in., panhead Phillips (8) (8) 8 Retainer nut, 10-32 (8) 5 Screw, 8-32 x 5/16-in., flathead Phillips (16) FIGURE 15 Items in the Universal Two-Post Rack Kit CAUTION Use the screws specified in the procedure. Using longer screws can damage the device. Ensure that the items listed and illustrated in Figure 15 are included in the kit. Note that not all parts may be used with certain installations depending on the device type. Flush-front mounting Observe the following notes when using this procedure: • The device must be turned off and disconnected from the fabric during this procedure. • The illustrations in this document show a 1U device, but the instructions are the same for a 2U device. • The illustrations for this procedure show a two-post rack with narrow posts (3- to 5-inch) as an example. • The illustrations in the rack installation procedures are for reference only and may not show the actual device. Complete the following tasks to install the device in a rack: 42 Brocade G620 Hardware Installation Guide 53-1003990-01

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
1
Front brackets (2)
2
Rear brackets, 3-5 inch post (2)
3
Rear brackets, 5-6 inch post (2)
4
Screw, 8-32 x 5/16-in., panhead Phillips
(8)
5
Screw, 8-32 x 5/16-in., flathead Phillips
(16)
6
Screw, 6-32 x 1/4-in., panhead Phillips
(8)
7
Screw, 10-32 x 5/8-in., panhead Phillips
(8)
8
Retainer nut, 10-32 (8)
FIGURE 15
Items in the Universal Two-Post Rack Kit
CAUTION
Use the screws specified in the procedure. Using longer screws can damage the device.
Ensure that the items listed and illustrated in
Figure 15
are included in the kit. Note that not all parts
may be used with certain installations depending on the device type.
Flush-front mounting
Observe the following notes when using this procedure:
•
The device must be turned off and disconnected from the fabric during this procedure.
•
The illustrations in this document show a 1U device, but the instructions are the same for a 2U
device.
•
The illustrations for this procedure show a two-post rack with narrow posts (3- to 5-inch) as an
example.
•
The illustrations in the rack installation procedures are for reference only and may not show the
actual device.
Complete the following tasks to install the device in a rack:
Flush-front mounting
42
Brocade G620 Hardware Installation Guide
53-1003990-01