Dell Brocade G620 Hardware Installation Guide - Page 81

Inserting a new power supply and fan assembly

Get Dell Brocade G620 PDF manuals and user guides View all Dell Brocade G620 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 81 highlights

Inserting a new power supply and fan assembly 4. Using a Phillips screwdriver, unscrew the captive screw. 5. Remove the power supply and fan assembly from the chassis by pulling the handle out and away from the chassis. Inserting a new power supply and fan assembly Complete the following steps to insert a new power supply and fan assembly into the chassis. CAUTION The power supply switch must be in the off position when you insert the power supply into the chassis. Damage to the switch can result if a live power supply is installed. The new power supply and fan assembly must have the same part number and airflow label (or lack thereof) as the power supply and fan assembly already installed. 1. To leave the device in service while installing a power supply and fan assembly, verify that the other power supply and fan assembly (the one already installed) has been powered on for at least four seconds and has a steady green LED. 2. Using a Phillips screwdriver, unscrew the captive screw of the filler panel that is located in the empty power supply and fan assembly slot. 3. Orient the new power supply and fan assembly with the captive screw on the right, as shown in the figure. Do not force the installation. If the power supply and fan assembly does not slide in easily, ensure that it is correctly oriented before continuing. CAUTION Carefully follow the mechanical guides on each side of the power supply slot and make sure the power supply is properly inserted in the guides. Never insert the power supply upside down. 1 The device 2 AC power supply and fan assembly 3 Captive screw FIGURE 33 Insert an AC power supply and fan assembly 4. Gently push the power supply and fan assembly into the chassis until it is firmly seated. Brocade G620 Hardware Installation Guide 81 53-1003990-01

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
4.
Using a Phillips screwdriver, unscrew the captive screw.
5.
Remove the power supply and fan assembly from the chassis by pulling the handle out and away
from the chassis.
Inserting a new power supply and fan assembly
Complete the following steps to insert a new power supply and fan assembly into the chassis.
CAUTION
The power supply switch must be in the off position when you insert the power supply into the
chassis. Damage to the switch can result if a live power supply is installed.
The new power supply and fan assembly must have the same part number and airflow label (or lack
thereof) as the power supply and fan assembly already installed.
1.
To leave the device in service while installing a power supply and fan assembly, verify that the other
power supply and fan assembly (the one already installed) has been powered on for at least four
seconds and has a steady green LED.
2.
Using a Phillips screwdriver, unscrew the captive screw of the filler panel that is located in the empty
power supply and fan assembly slot.
3.
Orient the new power supply and fan assembly with the captive screw on the right, as shown in the
figure.
Do not force the installation. If the power supply and fan assembly does not slide in easily, ensure
that it is correctly oriented before continuing.
CAUTION
Carefully follow the mechanical guides on each side of the power supply slot and make sure
the power supply is properly inserted in the guides. Never insert the power supply upside
down.
1
The device
2
AC power supply and fan assembly
3
Captive screw
FIGURE 33
Insert an AC power supply and fan assembly
4.
Gently push the power supply and fan assembly into the chassis until it is firmly seated.
Inserting a new power supply and fan assembly
Brocade G620 Hardware Installation Guide
81
53-1003990-01