Dell OptiPlex GX1 Dell OptiPlex GX1/GX1p Managed PC and OptiPlex NX1 Net PC S - Page 132
remove it from the computer.
View all Dell OptiPlex GX1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
drive-cage slide rail chassis slot hinge tabs (3) sliding tab To remove the hard-disk drive bracket, follow these steps: 1. Disconnect the DC power cable and the interface cable from the back of each hard-disk drive installed in the hard-disk drive bracket. 2. Remove the screw that secures the hard-disk drive bracket to the drive cage in the chassis. 3. Grasp the bracket, and rotate it outward from the chassis until the sliding tab clears the slide rail on the drive cage. 4. Lift the hard-disk drive bracket up slightly to free the hinge tabs and remove it from the computer. When you reinstall the hard-disk drive bracket, insert the bracket's hinge tabs into the chassis slot so that the tabs hook over the slot. Then rotate the bracket toward the drive cage, and fit the bracket's sliding tab on the drive-cage slide rail. 6-14