Dell OptiPlex GX1 Dell OptiPlex GX1/GX1p Managed PC and OptiPlex NX1 Net PC S - Page 145

Removing and Replacing Parts on the OptiPlex NX1 Net PC Chassis

Get Dell OptiPlex GX1 PDF manuals and user guides View all Dell OptiPlex GX1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 145 highlights

This chapter provides procedures for removing the components, assemblies, and subassemblies in the Dell OptiPlex NX1 Net PC computer. If you are servicing a low-profile, midsize, or mini tower chassis, use Chapter 4, 5, or 6, as appropriate for your system. Unless otherwise noted, each procedure assumes the following: You have performed the steps in "Precautionary Measures" found later in this chapter. You have removed the computer cover. You can replace or reinstall a part by performing the removal procedure in reverse order unless additional information is provided. Most of the procedures in this chapter require the use of one or more of the following tools: Small flat-blade screwdriver Wide flat-blade screwdriver #1 and #2 Phillips screwdrivers 1/4-inch nutdriver Tweezers or long-nose pliers Also, use a wrist grounding strap as explained in the next section, "Precautionary Measures." Removing and Replacing Parts on the OptiPlex NX1 Net PC Chassis 7-1

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
Removing and Replacing Parts on the OptiPlex NX1 Net PC Chassis
7-1
&+$37(5²¹
²
5HPRYLQJ±DQG±5HSODFLQJ±3DUWV±RQ±
WKH±2SWL3OH[±1;²±1HW±3&±&KDVVLV
This chapter provides procedures for removing the components, assemblies,
and subassemblies in the Dell OptiPlex NX1 Net PC computer. If you are ser-
vicing a low-profile, midsize, or mini tower chassis, use Chapter 4, 5, or 6, as
appropriate for your system.
Unless otherwise noted, each procedure assumes the following:
¼
You have performed the steps in “Precautionary Measures” found later in
this chapter.
¼
You have removed the computer cover.
¼
You can replace or reinstall a part by performing the removal procedure in
reverse order unless additional information is provided.
5HFRPPHQGHG±7RROV
Most of the procedures in this chapter require the use of one or more of the
following tools:
¼
Small flat-blade screwdriver
¼
Wide flat-blade screwdriver
¼
#1 and #2 Phillips screwdrivers
¼
1/4-inch nutdriver
¼
Tweezers or long-nose pliers
Also, use a wrist grounding strap as explained in the next section, “Precaution-
ary Measures.”