Dell OptiPlex GX1 Dell OptiPlex GX1/GX1p Managed PC and OptiPlex NX1 Net PC S - Page 167
Power Management - hard disk changing
View all Dell OptiPlex GX1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 167 highlights
Auto Power On Power Management Allows you to set the day and time you want the system to power on automatically. The time uses the 24-hour format. With the Power Management option enabled, DPMS monitors and most EIDE drives automatically switch into low-power mode during periods of system inactivity. Wakeup On LAN Sound NIC Mouse Serial Port 1 Serial Port 2 Parallel Port Parallel Mode IDE Hard Disk Diskette Speaker NOTE: Not all EIDE hard-disk drives support this feature. Enabling this feature for a drive that does not support it may cause the EIDE drive to become inoperable until the system is restarted and the Power Management option is disabled. Wakeup On LAN determines whether the Wakeup On LAN feature is set to Off or On. You must reboot your system before a change takes effect. Enables (On) or disables (Off) the integrated sound controller. Enables (On) or enables without PXE support (On [PXE Off]) or disables (Off) the integrated NIC. Enables or disables the built-in PS/2compatible mouse port. Configures system's built-in serial port 1. Configures system's built-in serial port 2. Configures system's built-in parallel port. The port's I/O address may be set to 278h, 3BCh, or 378h. Otherwise, the port may be disabled. Controls whether system's built-in parallel port acts as an AT-compatible (unidirectional) or PS/2-compatible (bidirectional) port. Enables system's built-in EIDE hard-disk drive interface. Enables system's built-in diskette drive controller. Enables onboard speaker. System Setup Program A-5