Dell OptiPlex GX1 Dell OptiPlex GX1/GX1p Managed PC and OptiPlex NX1 Net PC S - Page 134
the slot in the chassis.
View all Dell OptiPlex GX1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
power supply DC power cables slot power-supply detent link securing tab To remove the system power supply, follow these steps: 1. Disconnect the AC power cable from the back of the system power supply. 2. Free the system power supply from the securing tab labeled "RELEASE->," and rotate it upward until it locks. Press the securing tab to release the power supply. 3. Disconnect the DC power cables from the system board and the drives. 4. Facing the left side of the computer, move the front end of the system power supply toward you, and lift it up to disengage the power supply from the slot in the chassis. 5. Lift the system power supply from the computer. When you reinstall the system power supply, place the power-supply detent link over the pin on the power supply as you position the power supply in the chassis opening. 6-16