Dell OptiPlex GX1 Dell OptiPlex GX1/GX1p Managed PC and OptiPlex NX1 Net PC S - Page 83
Remove the four hard-disk drive mounting screws that attach the hard-disk
View all Dell OptiPlex GX1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
captive screw hard-disk drive mounting screw holes (4) tabs (2) front of computer notches (2) To remove the hard-disk drive, follow these steps: 1. Disconnect the DC power cable and the interface cable from the back of the drive. 2. Loosen the captive screw that secures the hard-disk drive bracket to the chassis. 3. Pivot the hard-disk drive assembly up and lift it out of the chassis. 4. Remove the four hard-disk drive mounting screws that attach the hard-disk drive to the hard-disk drive bracket. When you reinstall the hard-disk drive assembly, be sure that the tabs on the back of the mounting plate fully engage the notches on the chassis-before you rotate the assembly into place. Removing and Replacing Parts on the Low-Profile Chassis 4-11