Dell PowerEdge R240 EMC PowerEdge R240 Installation and Service Manual - Page 40
Installing the air shroud
![]() |
View all Dell PowerEdge R240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Figure 13. Removing the air shroud Next steps 1. Replace the air shroud. Installing the air shroud Prerequisites 1. Follow the safety guidelines listed in Safety instructions. 2. Follow the procedure listed in Before working inside your system. NOTE: Route the cable properly to prevent the cable from being pinched or crimped. Steps 1. Align the tab on the air shroud with the slot on the system. 2. Lower the air shroud into the system until it is firmly seated. Figure 14. Installing the air shroud Next steps 1. Follow the procedure listed in the After working inside your system. 40 PowerEdge R240 installing and removing system components
![](/manual_guide/products/dell-poweredge-r240-emc-poweredge-r240-installation-service-manual-c3fd45e/40.png)
Figure 13. Removing the air shroud
Next steps
1.
Replace the air shroud
.
Installing the air shroud
Prerequisites
1.
Follow the safety guidelines listed in
Safety instructions
.
2.
Follow the procedure listed in
Before working inside your system
.
NOTE:
Route the cable properly to prevent the cable from being pinched or crimped.
Steps
1.
Align the tab on the air shroud with the slot on the system.
2.
Lower the air shroud into the system until it is firmly seated.
Figure 14. Installing the air shroud
Next steps
1.
Follow the procedure listed in the
After working inside your system
.
40
PowerEdge R240 installing and removing system components