Dell PowerEdge R240 EMC PowerEdge R240 Installation and Service Manual - Page 41
Cooling fans, Removing the cooling fan blank
View all Dell PowerEdge R240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Cooling fans Removing the cooling fan blank Prerequisites 1. Follow the safety guidelines listed in Safety instructions. 2. Follow the procedure listed in the Before working inside your system. Steps 1. Press the release tabs and push the fan blank out to disengage it from the fan cage. 2. Lift the fan blank out of the fan cage. Figure 15. Removing the fan blank Next steps 1. If applicable, replace the cooling fan blank or install the cooling fan. Installing the cooling fan blank Prerequisites 1. Follow the safety guidelines listed in Safety instructions. 2. Follow the procedure listed in the Before working inside your system. Steps 1. Lower the fan blank into the fan cage. 2. Insert the lower tabs on the fan blank into the lower wall on the fan cage. 3. Press the fan blank until the release tabs lock into place. PowerEdge R240 installing and removing system components 41