Dell PowerEdge R240 EMC PowerEdge R240 Installation and Service Manual - Page 63
Removing expansion card from the expansion card riser
View all Dell PowerEdge R240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Figure 42. Installing the expansion card riser Next steps 1. Install the air shroud. 2. Follow the procedure listed in the After working inside your system. Removing expansion card from the expansion card riser Prerequisites 1. Follow the safety guidelines listed in the Safety instructions. 2. Follow the procedure listed in the Before working inside your system. 3. Remove the air shroud. 4. If installed, remove the expansion card riser. 5. If applicable, disconnect the cables from the expansion card. Steps 1. Turn-over the the expansion card riser, and holding the expansion card by its edges, remove the card from the riser. PowerEdge R240 installing and removing system components 63
Figure 42. Installing the expansion card riser
Next steps
1.
Install the air shroud
.
2.
Follow the procedure listed in the
After working inside your system
.
Removing expansion card from the expansion card riser
Prerequisites
1.
Follow the safety guidelines listed in the
Safety instructions
.
2.
Follow the procedure listed in the
Before working inside your system
.
3.
Remove the air shroud
.
4.
If installed,
remove the expansion card riser
.
5.
If applicable, disconnect the cables from the expansion card.
Steps
1.
Turn-over the the expansion card riser, and holding the expansion card by its edges, remove the card from the riser.
PowerEdge R240 installing and removing system components
63