Dell PowerEdge R240 EMC PowerEdge R240 Installation and Service Manual - Page 49
Installing a 2.5-inch drive into a 3.5-inch drive adapter, Removing a 3.5-inch drive adapter from
View all Dell PowerEdge R240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Next steps 1. Install a 2.5-inch drive into the 3.5-inch drive adapter. Installing a 2.5-inch drive into a 3.5-inch drive adapter Steps 1. Align the screw holes on the 2.5-inch drive with the screw holes on the 3.5-inch drive adapter. 2. Using a Phillips #1 screwdriver, install the screws to secure the drive to the 3.5-inch drive adapter. Figure 26. Installing a 2.5-inch drive into a 3.5-inch drive adapter Next steps 1. Follow the procedure listed in the After working inside your system. Removing a 3.5-inch drive adapter from a 3.5-inch drive carrier Prerequisites 1. Follow the safety guidelines listed in the Safety instructions. 2. Remove the 3.5-inch drive carrier. Steps 1. Remove the screws from the rails on the drive carrier. 2. Lift the 3.5 inch drive adapter out of the drive carrier. PowerEdge R240 installing and removing system components 49