Dell PowerEdge R6525 EMC Installation and Service Manual - Page 113
Installing the IDSDM module
![]() |
View all Dell PowerEdge R6525 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Figure 91. Removing the IDSDM module Next steps 1. Replace the IDSDM module. Installing the IDSDM module Prerequisites 1. Follow the safety guidelines listed in the Safety instructions on page 42. 2. Follow the procedure listed in Before working inside your system on page 43. Steps 1. Locate the IDSDM connector on the system board. To locate IDSDM module, see the System board jumpers and connectors section. 2. Align IDSDM module with the connector on the system board. 3. Press the IDSDM module until it is firmly seated in the connector on the system board. Installing and removing system components 113
![](/manual_guide/products/dell-poweredge-r6525-emc-installation-service-manual-662b536/113.png)
Figure 91. Removing the IDSDM module
Next steps
1.
Replace the IDSDM module
.
Installing the IDSDM module
Prerequisites
1.
Follow the safety guidelines listed in the
Safety instructions
on page 42.
2.
Follow the procedure listed in
Before working inside your system
on page 43.
Steps
1.
Locate the IDSDM connector on the system board.
To locate IDSDM module, see the
System board jumpers and connectors
section.
2.
Align IDSDM module with the connector on the system board.
3.
Press the IDSDM module until it is firmly seated in the connector on the system board.
Installing and removing system components
113