Dell PowerEdge R6525 EMC Installation and Service Manual - Page 91
Closing the rail frame, Securing the force plate
View all Dell PowerEdge R6525 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Figure 71. Closing the rail frame 3. Secure the force plate to the processor socket base by tightening the screws in the sequence 1, 2, and 3. When all three screws are fully threaded, the socket is then actuated. The three screws are tightened to a torque value of 12.0 ± 1.2 lbf-in. NOTE: The screw numbers are marked on the force plate. NOTE: Press the force plate while tightening the screws to avoid tilting of the processor cover out of the processor socket. Figure 72. Securing the force plate Installing and removing system components 91
Figure 71. Closing the rail frame
3.
Secure the force plate to the processor socket base by tightening the screws in the sequence 1, 2, and 3. When all three screws are
fully threaded, the socket is then actuated. The three screws are tightened to a torque value of 12.0 ± 1.2 lbf-in.
NOTE:
The screw numbers are marked on the force plate.
NOTE:
Press the force plate while tightening the screws to avoid tilting of the processor cover out of the processor
socket.
Figure 72. Securing the force plate
Installing and removing system components
91