Dell PowerEdge R6525 EMC Installation and Service Manual - Page 58
Cooling fan, Removing a cooling fan module
View all Dell PowerEdge R6525 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Cooling fan Removing a cooling fan module Prerequisites 1. Follow the safety guidelines listed in the Safety instructions on page 42. 2. Follow the procedure listed in Before working inside your system on page 43. 3. If installed, remove the air shroud. Steps Holding the orange and black edges on the fan module, lift the cooling fan module horizontally to disconnect from the connector on the system board. NOTE: The procedure to remove standard, high performance, or very high performance fan module is same. Figure 31. Removing a cooling fan module WARNING: Ensure not to tilt or rotate the cooling fan module while removing from the system. Next steps 1. Replace a cooling fan module. Installing a cooling fan module Prerequisites 1. Follow the safety guidelines listed in the Safety instructions on page 42. 2. Follow the procedure listed in Before working inside your system on page 43. 3. If installed, remove the air shroud. Steps 1. Align and place the fan module connector horizontally with the connector on the system board. 58 Installing and removing system components