Dell PowerEdge R6525 EMC Installation and Service Manual - Page 59
Drives, Removing a drive blank
View all Dell PowerEdge R6525 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
NOTE: The procedure to install standard, high performance, or very high performance fan module is same. 2. Press the touch point on the cooling fan module until firmly connected. Figure 32. Installing a cooling fan module Next steps 1. If removed, install the air shroud. 2. Follow the procedure listed in After working inside your system on page 43. Drives Removing a drive blank Prerequisites 1. Follow the safety guidelines listed in the Safety instructions on page 42. 2. If installed, remove the front bezel. CAUTION: To maintain proper system cooling, drive blanks must be installed in all empty drive slots. Steps Press the release button, and slide the drive blank out of the drive slot. Installing and removing system components 59
NOTE:
The procedure to install standard, high performance, or very high performance fan module is same.
2.
Press the touch point on the cooling fan module until firmly connected.
Figure 32. Installing a cooling fan module
Next steps
1.
If removed,
install the air shroud
.
2.
Follow the procedure listed in
After working inside your system
on page 43.
Drives
Removing a drive blank
Prerequisites
1.
Follow the safety guidelines listed in the
Safety instructions
on page 42.
2.
If installed,
remove the front bezel
.
CAUTION:
To maintain proper system cooling, drive blanks must be installed in all empty drive slots.
Steps
Press the release button, and slide the drive blank out of the drive slot.
Installing and removing system components
59