Dell PowerEdge R6525 EMC Installation and Service Manual - Page 90
Installing the processor
View all Dell PowerEdge R6525 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Installing the processor Prerequisites 1. Follow the safety guidelines listed in the Safety instructions on page 42. 2. Follow the procedure listed in Before working inside your system on page 43. 3. Remove the heat sink. Steps 1. Holding the blue tab on the processor tray, slide the tray into the processor socket rail frame until firmly seated. Figure 70. Placing the processor tray into the rail frame 2. Push the rail frame down until the blue latches lock into place. 90 Installing and removing system components
Installing the processor
Prerequisites
1.
Follow the safety guidelines listed in the
Safety instructions
on page 42.
2.
Follow the procedure listed in
Before working inside your system
on page 43.
3.
Remove the heat sink
.
Steps
1.
Holding the blue tab on the processor tray, slide the tray into the processor socket rail frame until firmly seated.
Figure 70. Placing the processor tray into the rail frame
2.
Push the rail frame down until the blue latches lock into place.
90
Installing and removing system components