Dell PowerEdge R6525 EMC Installation and Service Manual - Page 75
Installing the rear drive module
![]() |
View all Dell PowerEdge R6525 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Figure 57. Removing the rear drive module Next steps 1. Replace the rear drive module. Installing the rear drive module Prerequisites 1. Follow the safety guidelines listed in Safety instructions on page 42. 2. Follow the procedure listed in Before working inside your system on page 43. 3. Remove the air shroud. Steps 1. Align the rear drive module with the guide on the system board. 2. Lower the rear drive module and slide till it clicks. 3. Using a Phillips #1 screwdriver, tighten the captive screws on the rear drive module. Installing and removing system components 75
![](/manual_guide/products/dell-poweredge-r6525-emc-installation-service-manual-662b536/75.png)
Figure 57. Removing the rear drive module
Next steps
1.
Replace the rear drive module.
Installing the rear drive module
Prerequisites
1.
Follow the safety guidelines listed in
Safety instructions
on page 42.
2.
Follow the procedure listed in
Before working inside your system
on page 43.
3.
Remove the air shroud.
Steps
1.
Align the rear drive module with the guide on the system board.
2.
Lower the rear drive module and slide till it clicks.
3.
Using a Phillips #1 screwdriver, tighten the captive screws on the rear drive module.
Installing and removing system components
75