Dell PowerEdge R6525 EMC Installation and Service Manual - Page 55
Air shroud, Removing the air shroud
![]() |
View all Dell PowerEdge R6525 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Air shroud Removing the air shroud Prerequisites CAUTION: Never operate your system with the air shroud removed. The system may get overheated quickly, resulting in shutdown of the system and loss of data. 1. Follow the safety guidelines listed in the Safety instructions on page 42. 2. Follow the procedure listed in Before working inside your system on page 43. Steps 1. Hold the edges of the air shroud, and lift the air shroud out of the system. NOTE: The air shroud is required for the standard heat sink configuration. For the L-type heat sink configuration, air shroud is not supported. Figure 27. Removing the air shroud 2. For the air shroud on the rear drive module, hold the edges of the air shroud, and lift the air shroud out of the rear drive module. Installing and removing system components 55
![](/manual_guide/products/dell-poweredge-r6525-emc-installation-service-manual-662b536/55.png)