Dell PowerEdge T550 EMC Installation and Service Manual - Page 101
Optional tape backup unit, Removing the tape backup unit blank
View all Dell PowerEdge T550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Figure 96. Installing the optical drive Next steps 1. If removed, install the front bezel. 2. Connect the power cable and the data cable to the optical drive. NOTE: Route the cables properly to prevent them from being pinched or crimped. 3. Follow the procedure that is listed in After working inside your system. Optional tape backup unit This is a service technician replaceable part only. Removing the tape backup unit blank Prerequisites 1. Follow the safety guidelines listed in Safety instructions. 2. Follow the procedure that is listed in Before working inside your system. 3. If installed, remove the front bezel. Steps Push the protrusion at the rear of the tape backup unit blank and slide it towards the front of the system. Installing and removing system components 101