Dell PowerEdge T550 EMC Installation and Service Manual - Page 54
Installing the front PERC module for 3.5-inch drive backplane.
![]() |
View all Dell PowerEdge T550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
3. Disconnect all the cables connected to the front PERC module. Steps 1. Align the connectors and guide slots on the front PERC module with the connectors and guide pins on the drive backplane. 2. Slide the front PERC module until the module is connected to the drive backplane. 3. Using a Phillips 2 screwdriver, tighten the captive screws on the front PERC module. NOTE: The numbers on the image do not depict the exact steps. The numbers are for representation of sequence. Figure 44. Installing the front PERC module for 3.5-inch drive backplane. Figure 45. Installing the front PERC module for 2.5-inch drive backplane. 54 Installing and removing system components
![](/manual_guide/products/dell-poweredge-t550-emc-installation-service-manual-732b751/54.png)
3.
Disconnect all the cables connected to the front PERC module.
Steps
1.
Align the connectors and guide slots on the front PERC module with the connectors and guide pins on the drive backplane.
2.
Slide the front PERC module until the module is connected to the drive backplane.
3.
Using a Phillips 2 screwdriver, tighten the captive screws on the front PERC module.
NOTE:
The numbers on the image do not depict the exact steps. The numbers are for representation of sequence.
Figure 44. Installing the front PERC module for 3.5-inch drive backplane.
Figure 45. Installing the front PERC module for 2.5-inch drive backplane.
54
Installing and removing system components