Dell PowerEdge T550 EMC Installation and Service Manual - Page 41
Installing caster wheels, Removing caster wheels
View all Dell PowerEdge T550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Figure 29. Removing caster wheels Next steps Replace the caster wheels or Install the system feet. Installing caster wheels Prerequisites 1. Follow the safety guidelines listed in Safety instructions. 2. Place the system on its side on a flat, stable surface. 3. If installed, remove the system feet. CAUTION: Install the caster wheels on a stand-alone tower system to provide stability to the system. An unstable system might tip over and cause injury or damage to the system. NOTE: This T series server only uses Dell EMC caster wheels. Steps Align the caster wheel to the base of system and tighten the captive screw to secure the caster wheel into place. Installing and removing system components 41
Figure 29. Removing caster wheels
Next steps
Replace the caster wheels
or
Install the system feet
.
Installing caster wheels
Prerequisites
1.
Follow the safety guidelines listed in
Safety instructions
.
2.
Place the system on its side on a flat, stable surface.
3.
If installed,
remove the system feet
.
CAUTION:
Install the caster wheels on a stand-alone tower system to provide stability to the system. An
unstable system might tip over and cause injury or damage to the system.
NOTE:
This T series server only uses Dell EMC caster wheels.
Steps
Align the caster wheel to the base of system and tighten the captive screw to secure the caster wheel into place.
Installing and removing system components
41