Dell PowerEdge T550 EMC Installation and Service Manual - Page 62
Removing a 2.5-inch drive from a 3.5-inch drive adapter
![]() |
View all Dell PowerEdge T550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Figure 53. Installing a 3.5-inch drive adapter into the 3.5-inch drive carrier Next steps 1. Install the drive carrier. 2. If removed, install the front bezel. Removing a 2.5-inch drive from a 3.5-inch drive adapter Prerequisites 1. Follow the safety guidelines listed in Safety instructions. 2. Remove the 3.5-inch drive adapter from the 3.5-inch drive carrier. NOTE: A 2.5-inch drive is installed in a 3.5-inch drive adapter, which is then installed in the 3.5-inch drive carrier. Steps 1. Using a Phillips 2 screwdriver, remove the screws from the side of the 3.5-inch drive adapter. NOTE: If the drive carrier has Torx screw, use Torx 6 screwdriver to remove the drive. 2. Remove the 2.5-inch drive from the 3.5-inch drive adapter. 62 Installing and removing system components
![](/manual_guide/products/dell-poweredge-t550-emc-installation-service-manual-732b751/62.png)