Dell PowerEdge T550 EMC Installation and Service Manual - Page 38
System feet, Removing the system feet
![]() |
View all Dell PowerEdge T550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Figure 26. Installing the front bezel System feet Removing the system feet Prerequisites NOTE: It is recommended that you remove the system feet only when you are converting the system from the tower mode to the rack mode, or when you are replacing the system feet with the wheel assembly. 1. Follow the safety guidelines listed in Safety instructions. 2. Place the system on its side on a flat, stable surface. 3. Rotate the system feet inward. Steps 1. Using the Phillips 2 screwdriver, remove the screw that secures the foot to the base of the system. 2. Repeat the preceding step to remove the remaining system feet. 38 Installing and removing system components
![](/manual_guide/products/dell-poweredge-t550-emc-installation-service-manual-732b751/38.png)
Figure 26. Installing the front bezel
System feet
Removing the system feet
Prerequisites
NOTE:
It is recommended that you remove the system feet only when you are converting the system from the tower mode
to the rack mode, or when you are replacing the system feet with the wheel assembly.
1.
Follow the safety guidelines listed in
Safety instructions
.
2.
Place the system on its side on a flat, stable surface.
3.
Rotate the system feet inward.
Steps
1.
Using the Phillips 2 screwdriver, remove the screw that secures the foot to the base of the system.
2.
Repeat the preceding step to remove the remaining system feet.
38
Installing and removing system components