Dell PowerEdge T550 EMC Installation and Service Manual - Page 61
Installing a 3.5-inch drive adapter into the 3.5-inch drive carrier
View all Dell PowerEdge T550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Figure 52. Removing a 3.5-inch drive adapter from a 3.5-inch drive carrier Next steps Replace the 3.5-inch drive adapter into the 3.5-inch drive carrier. Installing a 3.5-inch drive adapter into the 3.5-inch drive carrier Prerequisites 1. Follow the safety guidelines listed in Safety instructions. 2. Install the 2.5 inch drive into the 3.5-inch drive adapter. Steps 1. Insert the 3.5-inch drive adapter into the 3.5-inch drive carrier with the connector end of the drive toward the back of the 3.5-inch drive carrier. 2. Align the screw holes on the 3.5-inch drive adapter with the holes on the 3.5-inch drive carrier. 3. Using a Phillips 1 screwdriver, secure the 3.5-inch drive adapter to the 3.5-inch carrier. NOTE: If the drive carrier has Torx screw, use Torx 6 (for 2.5-inch drive) or Torx 8 (for 3.5-inch drive) screwdriver to install the drive. Installing and removing system components 61