Dell PowerEdge T550 EMC Installation and Service Manual - Page 131
GPU card holder, Removing the GPU card holder
![]() |
View all Dell PowerEdge T550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
GPU card holder Removing the GPU card holder Prerequisites 1. Follow the safety guidelines listed in Safety instructions. 2. Follow the procedure that is listed in Before working inside your system. 3. Remove the air shroud. Steps Loosen the captive screws and pull the GPU card holder from the system. Figure 132. Removing GPU card holder Next steps Replace the GPU card holder. Installing the GPU card holder Prerequisites 1. Follow the safety guidelines listed in Safety instructions. 2. Follow the procedure that is listed in Before working inside your system. 3. Remove the air shroud. Steps 1. Align and lower the GPU card holder to the guide pin on the system. 2. Tighten the captive screws, until the GPU card holder is firmly seated. Installing and removing system components 131
![](/manual_guide/products/dell-poweredge-t550-emc-installation-service-manual-732b751/131.png)