Dell PowerSwitch S4820T FTOS 8.3.19.0 Command Line Reference Guide for the S48 - Page 1061
ipv6 multicast-limit, ipv6 multicast-routing
View all Dell PowerSwitch S4820T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1061 highlights
Command History Version 8.3.19.0 Introduced on S4820T Version 8.3.12.0 Introduced on the S4810. Usage Information Use the debug ipv6 mld_host command to debug the MLD protocol for all ports or for specified ports. Displayed information includes when a query is received, when a report is sent, when a mcast joins or leaves a group, and some reasons why a MLD query is rejected. ipv6 multicast-limit e Limit the number of multicast entries on the system. Syntax ipv6 multicast-limit limit Parameters limit Enter the desired maximum number of multicast entries on the system. Range: 1 to 50000 Default: 15000 Defaults 15000 routes Command Modes CONFIGURATION Command History Usage Information Version 8.3.1.0 Introduced The maximum number of multicast entries allowed on each line card is determined by the CAM profile. Multicast routes are stored in the IN-V6-McastFib CAM region, which has a fixed number of entries. Any limit configured via the CLI is superseded by this hardware limit. The opposite is also true; the CAM might not be exhausted at the time the CLI-configured route limit is reached. ipv6 multicast-routing e Enable IPv6 multicast forwarding. Syntax ipv6 multicast-routing To disable multicast forwarding, enter no ipv6 multicast-routing. Defaults Disabled Command Modes CONFIGURATION Command History Related Commands E-Series legacy command ipv6 pim sparse-mode Enable IPv6 PIM sparse mode on the interface. Multicast | 1061