Dell PowerSwitch S4820T FTOS 8.3.19.0 Command Line Reference Guide for the S48 - Page 39
copy Streamline Upgrade
View all Dell PowerSwitch S4820T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Source file name []: test.cfg User name to login remote host: admin Password to login remote host: Destination file name [test.cfg]: test1.cfg Related Commands cd Change working directory. copy (Streamline Upgrade) c e Copy a system image to a local file and update the boot profile. Syntax Parameters Defaults Command Modes Command History Usage Information copy source-url target-url [boot-image [synchronize-rpm [external]]] source-url target-url boot-image synchronize-rpm external Enter the source file in url format. The source file is a valid Dell Force10 release image. Image validation is automatic. Enter the local target file in url format. Enter the keyword boot-image to designate this copy command as a streamline update. Enter the keyword synchronize-rpm to copy the new image file to the peer RPM. Enter the keyword external to designate the target device on the peer RPM as external flash (instead of the default internal flash). Default: Internal Flash No default behavior CONFIGURATION Version 8.4.1.0 Version 7.5.1.0 Version 6.1.1.0 Added IPv6 addressing support for FTP, TFTP, and SCP. Introduced on C-Series Introduced In this streamline copy command, the source image is copied to the primary RPM and then, if specified, to the standby RPM. After the copy is complete, the new image file path on each RPM is automatically configured as the primary image path for the next boot. The current system image (the one from which the RPM booted) is automatically configured as the secondary image path. FTOS supports IPv4 and IPv6 addressing for FTP, TFTP, and SCP. Note: The keywords boot-image, synchronize-rpm, and external can be used on the Primary RPM only. File Management | 39