Dell PowerSwitch S4820T FTOS 8.3.19.0 Command Line Reference Guide for the S48 - Page 472
dcb-policy output, dcb-policy output stack-unit stack-ports all
View all Dell PowerSwitch S4820T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 472 highlights
www.dell.com | support.dell.com Command History Version 8.3.19.0 Version 8.3.12.0 Version 8.3.16.0 Introduced on the S4820T. Introduced on the S4810. Introduced on MXL 10/40GbE Switch IO Module Usage Information The dcb-policy input stack-unit all command overwrites any previous dcb-policy input stack-unit stack-unit-id configurations. Similarly, a dcb-policy input stack-unit stack-unit-id command overwrites any previous dcb-policy input stack-unit all configuration. Related Commands dcb-policy output stack-unit Apply the specified DCB output policy. stack-ports all dcb-policy output Apply the output policy with the ETS configuration to an egress interface. Syntax dcb-policy output policy-name To delete the output policy, use the no dcb-policy output command. Parameters policy name Enter the output policy name. Defaults none Command Modes INTERFACE Command History Version 8.3.19.0 Version 8.3.12.0 Version 8.3.16.0 Introduced on the S4820T. Introduced on the S4810. Introduced on MXL 10/40GbE Switch IO Module Usage When you apply an ETS output policy to on interface, ETS-configured scheduling and bandwidth Information allocation take precedence over any configured settings in QoS output policies. When DCB is disabled, ETS is disabled by default. When DCB is enabled, ETS is enabled for all interfaces that has the default ETS configuration applied (all dot1p priorities in the same group with equal bandwidth allocation). Related Commands dcb-output Create a DCB output policy. dcb-policy output stack-unit stack-ports all Apply the specified DCB output policy on all ports of the switch stack or a single stacked switch. 472 | Data Center Bridging