Dell PowerSwitch S4820T FTOS 8.3.19.0 Command Line Reference Guide for the S48 - Page 1110
Table 37-2., Command Output Descriptions, Line Beginning with, Description, commands for Area 0,
View all Dell PowerSwitch S4820T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1110 highlights
www.dell.com | support.dell.com show ip ospf c e s Display information on the OSPF process configured on the switch. Syntax show ip ospf process-id [vrf vrf name] Parameters process-id vrf name Enter the OSPF Process ID to show a specific process. If no Process ID is entered, command applies only to the first OSPF process. E-Series Only: Show only the OSPF information tied to the VRF process. Command Modes EXEC EXEC Privilege Command History Version 8.3.19.0 Version 8.3.8.0 Version 8.3.7.0 Version 7.9.1.0 Version 7.9.1.0 Version 7.8.1.0 Version 7.8.1.0 Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.1.1.1 Introduced on S4820T Added output for LSA throttling timers Introduced on S4810 Introduced VRF Introduced VRF Introduced support of Multi-Process OSPF. Introduced process-id option, in support of Multi-Process OSPF. Introduced on S-Series Introduced on C-Series Introduced on E-Series Usage Information If you delete all the network area commands for Area 0, the show ip ospf command output will not list Area 0. Example FTOS#show ip ospf 10 Routing Process ospf 10 with ID 1.1.1.1 Virtual router default-vrf Supports only single TOS (TOS0) routes SPF schedule delay 5 secs, Hold time between two SPFs 10 secs Convergence Level 0 Min LSA origination 0 msec, Min LSA arrival 1000 msec Min LSA hold time 5000 msec, Max LSA wait time 5000 msec Number of area in this router is 1, normal 1 stub 0 nssa 0 Area BACKBONE (0) Number of interface in this area is 1 SPF algorithm executed 205 times Area ranges are FTOS# Table 37-2. Command Output Descriptions: show ip ospf process-id Line Beginning with "Routing Process..." "Supports only..." "SPF schedule..." Description Displays the OSPF process ID and the IP address associated with the process ID. Displays the number of Type of Service (TOS) rouse supported. Displays the delay and hold time configured for this process ID. 1110 | Open Shortest Path First (OSPFv2)