Dell PowerSwitch S4820T FTOS 8.3.19.0 Command Line Reference Guide for the S48 - Page 1413

Command History Version 8.3.19.0 Version 8.3.11.1 Version 8.3.7.0 Version 7.6.1.0 Version 7.5.1.0 Introduced on S4820T Introduced on Z9000 Introduced on S4810 Support added for S-Series Support added for C-Series E-Series legacy command snmp ifmib ifalias long c e s z Display the entire description string through the Interface MIB, which would otherwise be truncated to 63 characters. Syntax snmp ifmib ifalias long Defaults Interface description truncated beyond 63 characters Command Modes CONFIGURATION Command History Version 8.3.19.0 Version 8.3.11.1 Version 8.3.7.0 Version 7.6.1.0 Version 7.5.1.0 unknown Introduced on S4820T Introduced on Z9000 Introduced on S4810 Introduced for S-Series Introduced for C-Series Introduced for E-Series Example !------command run on host connected to switch snmpwalk -c public 10.10.10.130 .1.3.6.1.2.1.31 | grep -i alias | more IF-MIB::ifAlias.134530304 = STRING: This is a port connected to Router2. This is a port connected to IF-MIB::ifAlias.134792448 = STRING: !------command run on Force10 switch FTOS#snmp ifmib ifalias long !------command run on server connected to switch snmpwalk -c public 10.10.10.130 .1.3.6.1.2.1.31 | grep -i alias | more IF-MIB::ifAlias.134530304 = STRING: This is a port connected to Router2. This is a port connected to Router2. This is a port connected to Router2. This is a port connected to Router2. This is a port connected to Router2. IF-MIB::ifAlias.134792448 = STRING: snmp-server community c e s z Configure a new community string access for SNMPv1, v2, and v3. Simple Network Management Protocol and Syslog | 1413