Dell PowerSwitch S4820T FTOS 8.3.19.0 Command Line Reference Guide for the S48 - Page 874

www.dell.com | support.dell.com Parameters Defaults Command Modes Command History To remove a default route, use the no neighbor {ipv6-address | peer-group-name} default-originate command. ipv6-address peer-group-name route-map map-name (OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format. The :: notation specifies successive hexadecimal fields of zeros. Enter the name of the peer group to set the default route of all routers in that peer group. (OPTIONAL) Enter the keyword route-map followed by the name of a configured route map. Not configured. ROUTER BGPV6-ADDRESS FAMILY Version 8.3.19.0 Version 8.4.2.1 Version 7.4.1.0 Introduced on S4820T Introduced on C-Series and S4810 Introduced on E-Series TeraScale neighbor distribute-list c e Distribute BGP information via an established prefix list. Syntax Parameters Defaults Command Modes Command History neighbor [ipv6-address | peer-group-name] distribute-list prefix-list-name [in | out] To delete a neighbor distribution list, use the no neighbor [ipv6-address | peer-group-name] distribute-list prefix-list-name [in | out] command. ipv6-address peer-group-name prefix-list-name in out (OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format. The :: notation specifies successive hexadecimal fields of zeros. Enter the name of the peer group to apply the distribute list filter to all routers in the peer group. Enter the name of an established prefix list. If the prefix list is not configured, the default is permit (to allow all routes). Enter the keyword in to distribute only inbound traffic. Enter the keyword out to distribute only outbound traffic. Not configured. ROUTER BGPV6-ADDRESS FAMILY Version 8.3.19.0 Introduced on S4820T 874 | IPv6 Border Gateway Protocol (IPv6 BGP)