Dell PowerSwitch S4820T FTOS 8.3.19.0 Command Line Reference Guide for the S48 - Page 96
reload, reset
View all Dell PowerSwitch S4820T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
www.dell.com | support.dell.com Syntax Parameters Defaults Command Modes Command History Related Commands power-on {linecard number | sfm sfm-slot-id} linecard number sfm standby Enter the keyword linecard and a number for the line card slot number. C-Series Range: 0-7 E-Series Range: 0 to 13 on a E1200/E1200i, 0 to 6 on a E600/E600i, and 0 to 5 on a E300. Enter the keyword sfm followed by the slot number of the SFM to power on. Note: This option is supported on E-Series only. Disabled EXEC Privilege Version 8.1.1.2 Introduced on E-Series ExaScale E600i Version 8.1.1.0 Introduced on E-Series ExaScale E1200i Version 7.5.1.0 Introduced on C-Series E-Series original Command power-off Power off a line card or standby SFM. reload c e s Syntax Command Modes Command History Usage Information Related Commands Reboot FTOS. reload EXEC Privilege Version 7.6.1.0 Introduced on S-Series Version 7.5.1.0 Introduced on C-Series E-Series original Command If there is a change in the configuration, FTOS will prompt you to save the new configuration. Or you can save your running configuration with the copy running-config command. reset reset stack-unit Reset a line card, RPM, a standby SFM (EtherScale only), or a failed SFM (TeraScale and ExaScale). Reset any designated stack member except the management unit reset c e Reset a line card, RPM, a standby SFM (EtherScale only), or a failed SFM (TeraScale only). 96 | Control and Monitoring