Dell PowerSwitch S4820T FTOS 8.3.19.0 Command Line Reference Guide for the S48 - Page 1425
As above, CONFIGURATION, v1v2creadu, 1v2cwriteu, access
View all Dell PowerSwitch S4820T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1425 highlights
Parameters Defaults Command Modes name group_name remote ip-address udp-port port-number 1 | 2c | 3 encrypted auth md5 | sha auth-password priv des56 priv password access access-list-name ipv6 access-list-name access-list-name ipv6 access-list-name Enter the name of the user (not to exceed 20 characters), on the host, that connects to the agent. Enter a text string (up to 20 characters long) as the name of the group. Defaults: The following groups are created for mapping to read/write community/security-names. • v1v2creadu - maps to a community with ro (read only) permissions • 1v2cwriteu - maps to a community rw (read/write) permissions Enter the keyword remote followed by the IP address that identifies the copy of the SNMP on the remote device. Enter the keyword udp-port followed by the UDP (User Datagram Protocol) port number on the remote device. Range: 0 to 65535. Default: 162 (OPTIONAL) Enter the security model version number (1, 2c, or 3). • 1 is the least secure version • 2c allows transmission of informs and counter 64, which allows for integers twice the width of what is normally allowed. • 3 is the most secure of the security modes. Default: 1 (OPTIONAL) Enter the keyword encrypted to specify the password appear in encrypted format (a series of digits, masking the true characters of the string). (OPTIONAL) Enter the keyword auth to specify authentication of a packet without encryption. (OPTIONAL) Enter the keyword md5 or sha to designate the authentication level. md5 - Message Digest Algorithm sha - Secure Hash Algorithm (OPTIONAL) Enter a text string (up to 20 characters long) password that will enable the agent to receive packets from the host. Minimum: 8 characters long (OPTIONAL) Enter the keyword priv des56 to initiate a privacy authentication level setting using the CBC-DES privacy authentication algorithm (des56). (OPTIONAL) Enter a text string (up to 20 characters long) password that will enables the host to encrypt the contents of the message it sends to the agent. Minimum: 8 characters long (Optional) Enter the keyword access followed by the standard IPv4 access list name (a string up to 16 characters long). (Optional) Enter the keyword ipv6 followed by the IPv6 access list name (a string up to 16 characters long) (Optional) Enter both an IPv4 and IPv6 access list name. As above CONFIGURATION Simple Network Management Protocol and Syslog | 1425