Dell PowerSwitch S4820T FTOS 8.3.19.0 Command Line Reference Guide for the S48 - Page 1155
show ip pim neighbor, View PIM neighbors., EXEC Privilege
View all Dell PowerSwitch S4820T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1155 highlights
Table 38-1. show ip pim interface Command Example Fields Field DR Prio DR Description Displays the Designated Router priority value configured on the interface (ip pim dr-priority command). Displays the IP address of the Designated Router for that interface. show ip pim neighbor c e s View PIM neighbors. Syntax Command Modes Command History Example show ip pim neighbor EXEC EXEC Privilege Version 8.3.19.0 Version 8.3.12.0 Version 8.1.1.0 Version 7.8.1.0 Introduced on S4820T Introduced on the S4810. Introduced on E-Series ExaScale Introduced on S-Series FTOS#show ip pim neighbor Neighbor Interface Address 127.87.3.4 Gi 7/16 FTOS# Uptime/Expires Ver DR Prio/Mode 09:44:58/00:01:24 v2 1 / S Table 38-2. show ip pim neighbor Command Example Fields Field Neighbor address Interface Uptime/expires Ver DR prio/Mode Description Displays the IP address of the PIM neighbor. List the interface type, with either slot/port information or ID (VLAN or Port Channel), on which the PIM neighbor was found. Displays the amount of time the neighbor has been up followed by the amount of time until the neighbor is removed from the multicast routing table (that is, until the neighbor hold time expires). Displays the PIM version number. • v2 = PIM version 2 Displays the Designated Router priority and the mode. • 1 = default Designated Router priority (use ip pim dr-priority) • DR = Designated Router • S = Sparse mode PIM-Sparse Mode (PIM-SM) | 1155