Dell PowerSwitch S5212F-ON EMC SmartFabric OS10 User Guide Release 10.5.1 - Page 1118

Defaults Command Mode Usage Information Example ○ 0 - Use an unencrypted password. ○ sha-256 - Use a SHA-256 encrypted password. ○ sha-512 - Use a SHA-512 encrypted password. ● priv-lvl privilege-level - Enter a privilege number from 1 to 15. Not configured CONFIGURATION To increase the required password strength, create stronger password rules using the passwordattributes command. The no version of this command removes a privilege-level password. OS10(conf)# enable password 0 P@$$w0Rd priv-lvl 12 OS10(conf)# enable password sha-256 $5$2uThib1o$84p.tykjmz/ w7j26ymoKBjrb7uepkUB priv-lvl 12 OS10(conf)# enable password sha-512 $6$Yij02Phe2n6whp7b $ladskj0HowijIlkajg981 priv-lvl 12 Supported Releases OS10# enable 12 password: OS10# show privilege Current privilege level is 12. 10.4.3.0 or later password-attributes Configures rules for password entries. Syntax Parameters password-attributes {[min-length number] [character-restriction {[upper number] [lower number] [numeric number] [special-char number]}} ● min-length number - (Optional) Sets the minimum number of required alphanumeric characters, from 6 to 32; default 9. ● character-restriction: ○ upper number - (Optional) Sets the minimum number of uppercase characters required, from 0 to 31; default 0. ○ lower number - (Optional) Sets the minimum number of lowercase characters required, from 0 to 31; default 0. ○ numeric number - (Optional) Sets the minimum number of numeric characters required, from 0 to 31; default 0. ○ special-char number - (Optional) Sets the minimum number of special characters required, from 0 to 31; default 0. Default ● Minimum length: 9 characters ● Uppercase characters: 0 ● Lowercase characters: 0 ● Numeric characters: 0 ● Special characters: 0 Command Mode Usage Information EXEC By default, the password you configure with the username password command must be at least nine alphanumeric characters. Use this command to increase password strength. When you enter the command, at least one parameter is required. When you enter the character-restriction parameter, at least one option is required. 1118 Security