Dell PowerSwitch S5212F-ON EMC SmartFabric OS10 User Guide Release 10.5.1 - Page 785

ipv6 ospf area Attaches an interface to an OSPF area. Syntax Parameters ipv6 ospf process-id area area-id ● process-id-Enter an OSPFv3 process ID for a specific OSPFv3 process, from 1 to 65535. ● area-id-Enter the OSPFv3 area ID in dotted decimal A.B.C.D format or enter an area ID number, from 1 to 65535. Default Command Mode Usage Information Example Not configured INTERFACE The no version of this command removes an interface from an OSPFv3 area. OS10(config)# interface vlan 10 OS10(conf-if-vl-10)# ipv6 ospf 10 area 1 Supported Releases 10.3.0E or later ipv6 ospf authentication Configures OSPFv3 authentication on an IPv6 interface. Syntax Parameters ipv6 ospf authentication {null | ipsec spi number {MD5 | SHA1} key} ● null - Prevents area authentication from being inherited on the interface. ● ipsec spi number - Enter a unique security policy index number, from 256 to 4294967295. ● md5 - Enable MD5 authentication. ● sha1 - Enable SHA1 authentication. ● key - Enter the text string used by the authentication type. Default Command Mode Usage Information IPv6 OSPF authentication is not configured on an interface. INTERFACE ● Before you enable IPsec authentication on an OSPFv3 interface, you must enable IPv6 unicast routing globally, configure an IPv6 address and enable OSPFv3 on the interface, and assign it to an area. ● The SPI value must be unique to one IPsec authentication or encryption security policy on the router. You cannot configure the same SPI value on another interface even if it uses the same authentication or encryption algorithm. ● You cannot use an IPsec MD5 or SHA1 authentication type and the null setting at same time on an interface. These settings are mutually exclusive. ● All neighboring OSPFv3 routers must share the key to exchange information. Only a non-encrypted key is supported. For MD5 authentication, the non-encrypted key must be 32 plain hex digits. For SHA1 authentication, the non-encrypted key must be 40 hex digits. An encrypted key is not supported. Example OS10(config)# interface ethernet 1/1/6 OS10(conf-if-eth1/1/6)# ipv6 ospf authentication ipsec spi 400 md5 12345678123456781234567812345678 Supported Releases 10.4.0E(R1) or later Layer 3 785