Dell PowerSwitch S5212F-ON EMC SmartFabric OS10 User Guide Release 10.5.1 - Page 53

NOTE: Management VRF is currently not supported on the MX7000 platforms. Configure management route OS10(config)# management route 10.10.20.0/24 10.1.1.1 OS10(config)# management route 172.16.0.0/16 managementethernet Configure username and password To set up remote access to OS10, create a username and password after you configure the management port and default route. The user role is a mandatory entry. Enter the password in clear text. It is converted to SHA-512 format in the running configuration. A password must have at least nine characters, including alphanumeric and special characters, and at least five different characters from the password that is previously used for the same username. For example: OS10(config)# username admin password alpha404! role sysadmin For backward compatibility with OS10 release 10.3.1E and earlier, passwords entered in MD-5, SHA-256, and SHA-512 format are supported. To increase the required password strength, use the password-attributes command. ● Create a username and password in CONFIGURATION mode. username username password password role role ○ username username - Enter a text string. A maximum of 32 alphanumeric characters; one character minimum. ○ password password - Enter a text string. A maximum of 32 alphanumeric characters; nine characters minimum. ○ role role - Enter a user role: ￭ sysadmin - Full access to all commands in the system, exclusive access to commands that manipulate the file system, and access to the system shell. A system administrator can create user IDs and user roles. The default privilege level is 15. ￭ secadmin - Full access to configuration commands that set security policy and system access, such as password strength, AAA authorization, and cryptographic keys. A security administrator can display security information, such as cryptographic keys, login statistics, and log information. The default privilege level is 15. ￭ netadmin - Full access to configuration commands that manage traffic flow through the switch, such as routes, interfaces, and ACLs. A network administrator cannot access configuration commands for security features or view security information. The default privilege level is 15. ￭ netoperator - Access to EXEC mode to view the current configuration with limited access. A network operator cannot modify any configuration setting on a switch. The default privilege level is 1. NOTE: To change a system administrator password, re-enter the command for the administrator username with a new password. OS10(config)# username admin password beta@1 role sysadmin Getting Started with Dell EMC SmartFabric OS10 53