Dell PowerSwitch S5212F-ON EMC SmartFabric OS10 User Guide Release 10.5.1 - Page 1570

SupportAssist person commands email-address Configures the email address of the contact person. Syntax Parameters Default Command Mode Usage Information Example email-address primary email-id [alternate email-id] email-id-Enter the email address of the contact person. Not configured SUPPORT-ASSIST Supported on the MX9116n and MX5108n switches in Full Switch mode starting in release 10.4.0(R3S). Also supported in SmartFabric mode starting in release 10.5.0. The no version of this command removes the configuration. OS10(conf-support-assist-ExampleCompanyName-FirstnameLastname)# emailaddress primary [email protected] alternate [email protected] Supported Releases 10.2.0E or later phone Configures the phone number of the contact person. Syntax Parameters Default Command Mode Usage Information Example phone primary string [alternate string] string-Enter the phone number of the contact person. Minimum length of phone number is nine digits. None SUPPORT-ASSIST Supported on the MX9116n and MX5108n switches in Full Switch mode starting in release 10.4.0(R3S). Also supported in SmartFabric mode starting in release 10.5.0. The no version of this command removes the configuration. OS10(conf-support-assist-ExampleCompanyName-FirstnameLastname)# phone primary 000-123-4567 Supported Releases 10.2.0E or later preferred-method Configures a preferred method to contact an individual. Syntax Parameters preferred-method {email | phone | no-contact} ● email-Enter to select email as the preferred contact method. ● phone-Enter to select phone as the preferred contact method. ● no-contact-Enter to specify that the individual does not want to be contacted through email or phone. Default No-contact Command Mode SUPPORT-ASSIST 1570 Troubleshoot Dell EMC SmartFabric OS10