Dell PowerSwitch S5212F-ON EMC SmartFabric OS10 User Guide Release 10.5.1 - Page 365

show fc fabric interface Shows the summary of the principal switch election states, ILS link type, port state, reason code, remote switch, and port name. Syntax Parameters Defaults Command Mode Usage Information show fc fabric interface None Not applicable EXEC ● Use this command to display the summary of principal switch election states, ILS link type, port state, remote switch, and port name. ● The Fabric states are Build Fabric, Reconfigure Fabric, EFP-Idle, EFP-Send, Principal-Switch, NonPrincipal-Switch, No Domain, and Stable states. ● The Link types are Unknown, Non-Principal ISL, Upstream Principal ISL, and Downstream Principal ISL. ● The Reason codes are: ○ BB Credit Isolation ○ R_A_TOV Mismatch ○ E_D_TOV Mismatch ○ Flow Control Not Supported ○ Class of Services Not Supported ○ Port Mode mismatch Isolation ○ Invalid Switch Name Isolation ○ Not Capable Principal Switch ○ Domain ID Overlap ○ Isolation due to ELP Failure ○ Isolation due to Loop Back Connection ○ Isolation due to EFP Max Retransmission Exceeded ○ Isolation due to BF Max Retransmission Exceeded ○ Isolation due to RCF Max Retransmission Exceeded ○ Isolation due to DIA Max Retransmission Exceeded ○ Isolation due to RDI Max Retransmission Exceeded Example OS10(config)# do show fc fabric interface Fabric-State : Stable Vfabric Intf Id Link type Port Reason Remote State Code Switch Name Remote Port Name 2 fc1/1/25:2 DOWNSTREAM EPORT NONE 10:00:e4:f0:04:3e:3d:95 20:00:e4:f0:04:3e:3e:0f Supported Releases 2 fc1/1/25:1 NONPRINPLISL EPORT NONE 10:00:e4:f0:04:3e:3d:95 20:00:e4:f0:04:3e:3e:0e 10.5.1.0 or later show fc fabric statistics Shows the FC fabric statistics for an interface. Syntax Parameters show fc fabric statistics [interface type node/slot/port[:subport] | vfabric vfabric-id] ● node/slot/port[:subport]-Enter the Interface type details. ● vfabric-ID-Enter the vfabric ID. Fibre Channel 365